NICEIC Approved · DA5, DA6, DA7
Electrician in Bexley
Need a qualified electrician in Bexley? Our NICEIC approved electricians handle everything from fault finding and rewiring to consumer unit upgrades and EICRs across DA5, DA6, DA7. All work certified to Part P standards.
Electrical Services services in Bexley
- Full and partial rewiring
- Consumer unit upgrades and replacements
- Electrical fault finding and repair
- EICRs (Electrical Installation Condition Reports)
- Lighting design and installation
- Socket and switch additions
- Outdoor and garden lighting
- Smoke and carbon monoxide detector installation
- Electric vehicle charger installation
- Commercial electrical work
Why choose our electricians in Bexley?
All our electricians are NICEIC approved. Every job in Bexley is completed to BS 7671 wiring regulations with full Part P certification where required.
We handle everything from a single socket addition to a complete house rewire across DA5, DA6, DA7. For older properties in Bexley, we work carefully around period features to minimise disruption.
For landlords, we provide Electrical Installation Condition Reports (EICRs) which are a legal requirement for all rental properties. We also install smoke detectors, carbon monoxide alarms, and emergency lighting for HMO compliance.
The properties across Bexley have post-war 1950s and 1960s housing with some 1930s semis and a few older properties in Bexley village. The electrical systems tend to reflect that age. We know what to expect when we turn up, and we carry the right parts for the wiring and boards we are likely to find.
Our teams are based in South London and regularly work across DA5, DA6, DA7. For most jobs in Bexley, we can usually get someone to you within a day or two of your call. Emergencies get same-day attendance.
Electrician in Bexley: local knowledge
Bexley's housing spans 1930s semis around the Old Bexley area and larger 1950s-60s developments across DA5, DA6, and DA7. The consumer units in these properties are frequently from the early 2000s or earlier, using outdated dual-RCD configurations. A common issue across the area is undersized main tails connecting the meter to the consumer unit, particularly in properties where electrical demand has increased with the addition of electric showers, cookers, and home office equipment without upgrading the supply infrastructure.
Recent electrical services jobs in Bexley
- Upgraded the main tails from 16mm to 25mm and replaced the consumer unit in a 1960s detached on Bourne Road, DA5, to accommodate an increased maximum demand
- Installed a new 45A cooker circuit and replaced the existing radial socket circuit with a ring circuit in a 1950s semi on Hurst Road, DA7
- Carried out a full EICR on a 1930s property near Old Bexley, DA5, identifying deteriorated insulation on the first-floor lighting circuit and undersized main earth conductor
- Fitted a complete home automation system including smart switches, automated blinds wiring, and a structured data network in a renovated DA6 property
Pro tip for Bexley homeowners
Check the thickness of the main tails — the cables running between your electricity meter and consumer unit. If they are noticeably thinner than the cables leaving the consumer unit to your circuits, they may be undersized for your current demand. Undersized main tails overheat gradually and are a common cause of melted meter connections in Bexley properties where demand has increased over the years.
Electrician in Bexley: what we typically see
Bexley covers a wide area from Old Bexley village through to Bexleyheath and beyond. Most of the housing is post-war suburban with a good proportion of 1930s semis. It is the kind of area where most properties are of a similar age and face similar maintenance issues. We regularly work on 1950s-60s semi-detached houses, 1930s semis, bungalows, and ex-council housing across DA5, DA6, DA7.
The most common electrical issues we deal with in Bexley include concrete tile roofs from the 1960s cracking and leaking and old copper plumbing systems with failing joints. A lot of properties still have old fuse boxes or consumer units without RCD protection. If that sounds like yours, it needs upgrading to a current 18th Edition consumer unit with RCD protection. It is not just a recommendation, it is a safety essential, and it will bring your electrics in line with current regulations.
For landlords, EICRs are legally required every 5 years for rental properties. The type of property affects the inspection. Flats and houses have different requirements, and conversions with shared supplies need extra attention. We carry out EICRs across Bexley and can handle any remedial work that comes up on the report.
Frequently asked questions
How much does an electrician cost in Bexley?
Electrical work pricing depends on the job scope. We provide free, no-obligation quotes for all work in Bexley. Call 020 3576 2747 or request a quote online.
Are your electricians in Bexley NICEIC approved?
Yes, all our electricians are NICEIC approved and fully qualified. All work is carried out to BS 7671 standards with Part P certification provided where required.
Do you provide EICRs for landlords in Bexley?
Yes, we carry out Electrical Installation Condition Reports (EICRs) for landlords across Bexley. These are legally required for rental properties and must be renewed every 5 years.
Can you rewire an old house in Bexley?
Yes, our NICEIC electricians carry out full and partial rewires in Bexley. We work carefully in older properties, minimising disruption while bringing the electrics up to current standards.
What electrical problems are common in Bexley properties?
Bexley has post-war 1950s and 1960s housing with some 1930s semis and a few older properties in Bexley village. Common electrical issues we see include concrete tile roofs from the 1960s cracking and leaking and old copper plumbing systems with failing joints. We know the housing stock well and carry the right parts and tools for the properties we work on locally.
How quickly can an electrician get to Bexley?
Our teams are based in South London and regularly work across DA5, DA6, DA7. For most jobs in Bexley, we can usually attend within a day or two. For emergencies like total power loss or burning smells from sockets, we aim for same-day attendance.
Why are my main tails important, and how do I know if they need upgrading in my Bexley property?
The main tails are the cables that connect your electricity meter to your consumer unit. They carry the total current demand for your entire property, so they must be sized for your maximum load. In many Bexley properties built in the 1950s and 60s, the original main tails are 16mm, which was adequate for the lower demands of that era. With the addition of electric showers, induction hobs, EV chargers, and other high-demand appliances, these tails can become overloaded. Signs of a problem include warm or discoloured connections at the meter or consumer unit. We assess maximum demand and upgrade the tails if needed, which requires coordination with your energy supplier for the meter-side connection.
Electricians near Bexley
We also cover these nearby areas from Bexley.
Need an electrician in Bexley?
Get a free quote today. NICEIC approved, fully insured, no hidden fees.